How do I change the Oil on my Kranzle
To change the oil in your 7/122 you will need
Malcolm
Last Update 3 years ago
13mm Spanner
22mm Spanner
Large Flat Screwdriver depending on the machine
Somewhere to oil the oil into
Kranzle Oil - Click here
Rags
STEP BY STEP INSTRUCTIONS.
Unplug the machine from Water and Electricity supply.
Release any pressure build-up by unscrewing the filler cap.
Place a bowl or something to catch the oil under the machine directly under the sump nut.
Unscrew the sump nut and drain the oil into the container.
Unscrew the clear sight glass on the side and clean it thoroughly. (some models don't have this)
Check orings on the sight glass, sump nut and filling cap for damage
Replace clean sight glass.
Replace sump plug once the oil has stopped draining.
Fill oil through the filling cap until just above the sight glass or to the max of a dipstick.
Replace the filling cap.
Dispose of the old oil as per local guidelines.
Notes:
Avoid damage, Do not overtighten any of the caps.
Avoid oil in contact with your skin.
If the sight glass is opaque or cracked then it will need replacing.
Replace any worn orings
Only use Kranzle Recommended oil
Do not overfill the oil
If the oil is white of grey you may need to clean the complete oil chamber or send in for service.
Parts you may need:
Recommend Kranzle OIL - Click Here
Sight Glass - Click Here
Sump Nut with Magnet - Click Here
Filler Cap (portable range) - Click Here
Have I missed anything? would you like me to add anything? Contact us.
if you found this helpful article helpful please take a minute to leave me a google review - https://g.page/aquaspray/review?rc